Oil pump, Lubricating oil pump (2024)

{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}

{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}

Flow: 0 l/min - 50 l/min
Head: 0 m - 19 m
Power: 500 W

The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils.• Media examples: Diesel, heating oil, ...

Compare this product Remove from comparison tool

Flow: 370 l/min
Pressure: 8 bar
Fluid temperature: 100 °C

Double-diaphragm pump - 5243-340Description:The double diaphragm pump is suitable for large scale industry and plant feeding as well as for large flow rates and higher viscosities.* typical applications: ...

Compare this product Remove from comparison tool

Paint pump - HD-EEccentric screw pump tube HD-E Industryfor oils, paints and disposal liquids is available in the food version (Pure)The HD-E Eccentric screw pump ...

Compare this product Remove from comparison tool

Flow: 0.01 l/min
Pressure: 38 bar

The ECP is designed to lubricate bearings and linear guides with oil or fluid grease. The pump works reliably in single-line systems of up to 20 lubrication points and a main line length of approximately ...

Compare this product Remove from comparison tool

Flow: 0.1, 0.2, 0.5 l/min
Pressure: 30 bar

... line. MKF units are used in single-line systems to supply fluid greases NLGI 000 and 00.MKL units supply an oil and air mixture in oil and air lubrication systems.Features and benefitsIntegrated ...

Compare this product Remove from comparison tool

Flow: 8, 14, 24 l/min
Pressure: 0 bar - 400 bar
Head: 120 m

The ZPU 08/14/24 pumps are used primarily in dual-line systems or as supply pumps and have a maximum operating pressure of 400 bar (5800 psi). Depending on the system layout, these electric pumps ...

Compare this product Remove from comparison tool

Pressure: 0 bar - 80 bar

Piston Pump Medium: oil / grease Drive: electric Dosing volume per stroke and outlet in cm³: 0,04 Number of outlets: 1...6 Tank size in l: 0,125 / 0,25 / 0,38 / 0,4 / 0,5

Compare this product Remove from comparison tool

Pressure: 0 bar - 350 bar

Piston pump in steel designMedium: oil / greaseDosing volume per stroke and outlet in cm³: 0,08 / 0,15 / 0,22Number of outlets: 1...24Tank size in l: 2...25

Compare this product Remove from comparison tool

Pressure: 0 bar - 60 bar

Delivery Pump Medium: oil Drive: electric Dosing volume per stroke and outlet in cm³: 0,03 Number of outlets: 1...4 Tank size in l: 0,7

Compare this product Remove from comparison tool

Flow: 800 l/h
Pressure: 700 bar

The diaphragm metering pump Orlita® MH has a robust metal diaphragm, which permits precise pump capacities even at very high pressure. The ORLITA® MH has a modular construction and therefore has a versatile ...

Compare this product Remove from comparison tool

Flow: 0.02 l/h - 18 l/h
Pressure: 16 bar - 400 bar

... hydraulic diaphragm metering pumps Evolution mikro EMFa and EMHa are extremely suitable for ultra-precise micro-metering in gas metering and filling processes of all kinds. They are also used for additive metering in ...

Compare this product Remove from comparison tool

Flow: 7 m³/h - 725 m³/h
Pressure: 20, 18, 15, 14 bar
Head: 0 m - 150 m

W+ is a comprehensive range of premium sanitary end-suction centrifugal pumps designed with maximum operating benefits and minimal life cycle costs in mind. Reliable and heavy duty design Energy efficient ...

Compare this product Remove from comparison tool

Flow: 32 us gal/min - 2,300 us gal/min
Pressure: 14, 20, 25, 18 bar
Head: 17'00" ft - 450'00"

W+ centrifugal pumps from SPX FLOW are designed to achieve total cost optimization with high efficiency and product dependability. They are installed in countless process facilities around the world helping producers ...

Compare this product Remove from comparison tool

Flow: 7 m³/h - 204 m³/h
Pressure: 1.75 bar
Head: 5 m - 97 m

This pump offers strong performance and competitive price/value within the lower spectrum of heavy-duty, centrifugal pump applications. It can be installed in a series without fear of seal failure from ...

Compare this product Remove from comparison tool

Flow: 35 l/min
Head: 8 m

... Comprising drum pump F 425 with mechanical seal, outer tube in stainless steel, commutator motor F 460, hose, hand nozzle and compression gland. Can also be used in hazardous areas. Technical data: ...

Compare this product Remove from comparison tool

Flow: 80 l/min
Head: 12 m

Pre-assembled pump kit to pump petroleum products out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430, outer ...

Compare this product Remove from comparison tool

Flow: 50 l/min
Head: 13 m

Pre-assembled pump kit to pump different media out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430, outer tube in stainless steel, ...

Compare this product Remove from comparison tool

Flow: 0 us gal/min - 285 us gal/min
Pressure: 0 psi - 120 psi
Head: 20'06"

NEW ARO AIR OPERATED DOUBLE DIAPHRAGM PUMP!3” NON-METALLIC PUMP MODELARO® EXP Series diaphragm pumps now include new 3” non-metallic models available in polypropylene or PVDF. The ...

Compare this product Remove from comparison tool

Flow: 0 l/min - 14.8 l/min
Pressure: 0 bar - 103 bar

... Extrusion: 2-ball pumps generate pressure to handle extrusion of low-to medium-viscosity Lubrication: ARO® 2-balls pumps provide the flow and pressure required for moving light oils ...

Compare this product Remove from comparison tool

Flow: 340.7 l/min

Features Designed with TOUGHNESS in mind. Move pump from location to location with it's compact, rugged design. Efficiency - Motor design delivers optimum air efficiency Reliability - ARO's patented 'Unbalanced' ...

Compare this product Remove from comparison tool

... Series is a complete range of gear pumps to automatically lubricate lubrication points with fluid grease or oil. The ES-EA Series is a single-line system and is available with a wide range of reservoirs ...

Compare this product Remove from comparison tool

... monitoring of grease level, pump function, distributor function and lubricant feeding• Integrated data logger with diagnosis module DiSysPump elementsUp to 21 lubricant outlets can be installed ...

Compare this product Remove from comparison tool

Pressure: 40 bar

The BEKA P26-series contains a range of pneumatic piston pumps used for oil and air lubrication. Oil and air lubrication is the perfect solution to lubricate bearings, especially high ...

Compare this product Remove from comparison tool

Flow: 0.0024 m³/h - 300 m³/h
Pressure: 8, 24, 12, 18 bar

... cavity pump handles even the most challenging materials gently and with low pulsation, irrespective of pressure and viscosity variations.Cost-effective operation with the NEMO® BY progressing cavity pumpFurthermore, ...

Compare this product Remove from comparison tool

Flow: 0.003 m³/h - 350 m³/h
Pressure: 72, 60, 48, 36, 24 bar

... ® SY progressing cavity pumps are employed in challenging applications for continuous, pressure-stable, gentle, and low-pulsation conveyance, as well as speed-proportional dosing, in almost every industry worldwide. These ...

Compare this product Remove from comparison tool

Flow: 400, 1,000 m³/h
Pressure: 0 bar - 24 bar

... you to pump up to 1000 m³/h at pressures of up to 20 bar with ease. No challenge is too great: Efficient pumping of oil, gas, and water mixtures containing high solids is possible. This ensures safe and ...

Compare this product Remove from comparison tool

Flow: 48 l/min
Pressure: 7,000 bar

Oil and Gas Technology - High Pressure Units and Components for FluidsHigh-pressure pumps and systems from Maximator allow reliable testing of pressurised hydraulic equipment and components in oil ...

Compare this product Remove from comparison tool

Pressure: 10, 30 bar

ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %!Absolutely ...

Compare this product Remove from comparison tool

Pressure: 40 bar

ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %!Absolutely ...

Compare this product Remove from comparison tool

Input diameter: 0.75 in

Drum pumpsPump material: PolypropyleneShaft: PolypropyleneSeals: depending on the mediaFlow rate: ca. 0,3 l/stroke*Hose connection: 3/4”The telescopic suction tube is adjustable ...

Compare this product Remove from comparison tool

Input diameter: 53 mm
Output diameter: 53 mm

... G 2”.APPLICATION: Metal hand crank rotary pump. The pump is suitable for diesel, heating oil, oils (up to SAE 90) and all other self-lubricating, ...

Compare this product Remove from comparison tool

Input diameter: 19 mm
Output diameter: 19 mm

... Fire brigade hand pump ATEX compliant, single-acting hand pump that can be used for following media of hazard classes A I-III: Diesel, heating oil, fuel, petroleum, anti-freezing liquid ...

Compare this product Remove from comparison tool

Flow: 9.8 l/min
Pressure: 2,500 bar - 3,000 bar
Power: 33, 30, 45, 41 kW

... M-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, ...

Compare this product Remove from comparison tool

Flow: 34 l/min
Pressure: 3,000 bar
Power: 95 kW

... M-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, ...

Compare this product Remove from comparison tool

Flow: 34 l/min
Pressure: 2,000 bar - 3,000 bar
Power: 124 kW

... M-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, ...

Compare this product Remove from comparison tool

Pressure: 0 bar - 4,000 bar

... -speed hand pumps for very high pressure up to 4000 barPMS-PDS Series are the FPT hand pumps on very high pressure.• Hand pumps with ...

Compare this product Remove from comparison tool

Pressure: 0 bar - 3,000 bar

... high pressure hydraulic hand pumps 1600 bar – 3000 bar and 4000 bar.• Manual pumps for very high pressures, light, compact and easy to carry, made ...

Compare this product Remove from comparison tool

Flow: 16 l/h - 1,460 l/h
Pressure: 5 bar - 20 bar
Fluid temperature: -10 °C - 80 °C

... from contamination because no hydraulic oil is used in the pump. Many customers prefer mechanically actuated diaphragm pumps, especially for pharmaceutical applications and fluids that ...

Compare this product Remove from comparison tool

Flow: 0 m³/h - 180 m³/h
Pressure: 0 bar - 1,200 bar
Fluid temperature: -70 °C - 400 °C

... diaphragm process pump has been used everywhere in high-pressure applications.The pump features tried-and-tested, patented LEWA diaphragm technology, absolutely secure and reliable operation and the ...

Compare this product Remove from comparison tool

Flow: 600 m³/h
Head: 384, 365 m
Power: 0 kW - 300 kW

SEMI-AXIAL ELECTRIC PUMPSA pump which has been thoroughly and extensively tested and trialled even for extreme applications, such as in the oil and gas sector, designed to guarantee ...

Compare this product Remove from comparison tool

Flow: 2,000, 2,400 m³/h
Head: 54, 50 m
Power: 132 kW

SUBMERSIBLE PUMPS FOR WASTE WATERSAER's experience and know-how in the clear water and submersible pumps field has led to the creation of this extensive, Italian-made range of pumps ...

Compare this product Remove from comparison tool

Flow: 0.2, 0.25 l/min
Pressure: 170, 180, 350 mbar
Weight: 140 g

The Bimor’s driving force, the bimorph, comprises two parallel piezoelectric wafers. Their nature is to expand or contract depending on the direction of the voltage. Therefore, when an alternating current is applied, one wafer expands ...

Compare this product Remove from comparison tool

Flow: 0.1 l/min
Pressure: 0 mbar - 1,000 mbar
Input diameter: 4.7 mm

The DPE-100 is a diaphragm DC liquid pump with rated voltage of 24 V and a flow rate is 100 ml/min with working pressure range 0 - 1000 mbar. The outlet pressure range is 3 bar and the self-priming pressure is 200 mbar. ...

Compare this product Remove from comparison tool

Flow: 0 l/min - 520 l/min
Pressure: 0 bar - 200 bar
Fluid temperature: -20 °C - 350 °C

External gear pump ZPAThe self-priming external gear pump ZPA is particularly suitable for uncritical media without fillers which are compatible to the used standard materialsThe pump ...

Compare this product Remove from comparison tool

Flow: 0.35 l/min
Pressure: 10 bar
Power: 0.09 kW

This oil gear pump is an oil control unit with a 3 l reservoir. It is comprised of a gear pump which sucks the lubricant from reservoir bottom (oil).After ...

Compare this product Remove from comparison tool

Pressure: 4 bar
Power: 2, 2.5 W
Fluid temperature: 30 °C - 30 °C

... on lubrication systems, with a working pressure of 4 barThis range of pumps is particularly suitable for use on lubrication systems, with a working pressure of 4 bar.The pump can be provided with ...

Compare this product Remove from comparison tool

Pressure: 3 bar

... number of the Single Line 01 distribution cylinders which the pump may supply continusly for a time of 5 minutes. Key features:- Flowrate: 15 cm3 / stroke (0,91 cu.in.)- Lubricant: oil, viscosity: ...

Compare this product Remove from comparison tool

Flow: 0 m³/min - 0.2 m³/min
Head: 0 m - 9 m
Power: 0.15 kW

The OM-series is a submersible semi-vortex pump designed for handling household wastewater and liquid carrying small solid matters. The semi-vortex pump design with moderate solids passage ...

Compare this product Remove from comparison tool

Flow: 1.1 m³/h - 102 m³/h
Pressure: 10.3, 15.5, 13.8 bar
Fluid temperature: -40 °C - 149 °C

PUMPS / POSITIVE DISPLACEMENT PUMPSTru-Fit models are available for U1, U2, Lobe and Twin Screw (UTS) positive displacement pumps. Tru-Fit pump model advantages include: ...

Compare this product Remove from comparison tool

Flow: 7.5 m³/h - 118.1 m³/h
Pressure: 200 psi - 300 psi
Length: 314 mm - 703 mm

Close coupled Tru-Fit® pump mounted on stainless steel base with stainless steel adaptors standard.Features:No shaft alignment necessary. No coupling guard required.Special base design enhances cleanability.Reduces ...

Compare this product Remove from comparison tool

Flow: 2,000 m³/h
Pressure: 0 psi - 145 psi

... alignment of portsProduct BenefitsPumps with flushed double mechanical seals can run dry indefinitelyVery low shear, product not damaged during pumpingNo internal rotor contactLarge fluid ...

Compare this product Remove from comparison tool

Flow: 0 l/s - 200 l/s
Pressure: 0 bar - 30 bar
Head: 140 m

Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades ...

Compare this product Remove from comparison tool

Flow: 12, 30, 16, 20 m³/h
Pressure: 3.5 bar
Power: 1.1, 1.5, 1.8 kW

... ® CC20 Series Tank Truck Eccentric Disc Pumps is a polyvalent heavy duty pump able to cover a wide range of applications. Depending on the construction, it can handle fuels, solvents, and waste products ...

Compare this product Remove from comparison tool

Flow: 15, 25, 40, 65, 110 m³/h
Pressure: 12 bar
Fluid temperature: 250 °C

... vane pumps can be dismantled without disconnecting the suction and discharge lines.Pump reassembly requires no special positioningReplacement parts are extremely competitiveThe pump ...

Compare this product Remove from comparison tool

Flow: 0 m³/h - 80 m³/h
Pressure: 8 bar

... excess pressureUnused shaft end is protected by a casingCompatible with diesel, heating oil, petrol, biodiesel paraffin, kerosene, oil heavy fuel and bitumenCompact ...

Compare this product Remove from comparison tool

Flow: 91 l/h - 910 l/h
Pressure: 1 bar - 4 bar
Power: 0.18 kW - 0.25 kW

... PERISTALTIC TUBE PUMP - ALBIN PUMPSpecifications:Flow rate: up to 910 l/h (240 gph)Discharge pressure: up to 4 bar (60 psi)Maximum suction lift: - 9,8 m Hoses: Polyamide reinforced, NR, ...

Compare this product Remove from comparison tool

Flow: 0.3 m³/h - 2.71 m³/h
Pressure: 1 bar - 4 bar
Power: 0.55 kW

... PERISTALTIC TUBE PUMP - ALBIN PUMPSpecifications:Flow rate: up to 2,71 m3/h (12 gpm)Discharge pressure: up to 4 bar (60 psi)Maximum suction lift: - 9,8 m Hoses: Polyamide reinforced, NR, EPDM, ...

Compare this product Remove from comparison tool

Flow: 2.3 m³/h - 13.9 m³/h
Pressure: 1 bar - 4 bar
Power: 1.5 kW - 3 kW

... PERISTALTIC TUBE PUMP - ALBIN PUMPSpecifications:Flow rate: up to 13,9 m3/h (61 gpm)Discharge pressure: up to 4 bar (60 psi)Maximum suction lift: - 9,8 m Hoses: Polyamide reinforced, NR, EPDM, ...

Compare this product Remove from comparison tool

Flow: 0 l/min - 1.1 l/min
Pressure: 0 bar - 2,500 bar
Length: 405 mm

... pressurizing oil, water or other fluidsThe MPS is a handy portable air driven mini pump that can be easily carried because of its weight (less than 17 kg with a filled tank) and size (405 x 308 x ...

Compare this product Remove from comparison tool

Flow: 50 l/min
Pressure: 70 bar - 5,000 bar

The P-Series of air-driven pumps reduce maintenance downtime and provide reliability for pumping various liquids with pressure up to 72,500 psi (5,000 bars). The pumps operate with an automatic reciprocating ...

Compare this product Remove from comparison tool